Sandtex Trade Ready Mixed Filler

WATER BASED

A smooth ready mixed water base filler, ideal for small crack repairs and making good minor surface defects. Suitable for interior and exterior use on masonry, woodwork and most types of building substrates.

• Purposely designed ready mixed exterior filler
• Guarantees no shrinkage
• Ideal for small crack repairs and making good minor surface defects.
• Water resistant, flexible & fast drying
• Application: Apply using a filling knife
• Spreading Rate: Variable depending on width and depth of filling or making good
• Drying Time: 1-2hrs depending on thickness
• Pack Sizes: 1 KG
• Colour Range: White

Colour Range: White.
Packaging: 1Kg plastic container.
Drying time: 1-2 hours depending on thickness.
Composition: Pigments, reinforcing fillers & styrene acrylic copolymer.
Spreading Rate: Variable depending on width and depth of filling or making good.
Wet thickness: As required up to a maximum of 7mm per application.
Limitations: Do not apply when there is a risk of rain, or when air or substrate temperatures are likely to fall below 8⁰C.
Application: Apply using a filling knife. Fill all cracks, open joints and small surface defects with Sandtex Trade Ready Mixed Filler, remove surplus material, finish to match existing and allow to dry.
Cleaning: Wash equipment with clean water immediately after use. Do not empty or wash the remains of Sandtex Trade Ready Mixed Filler into drainage systems.

Available from Crown Depots in Nairobi, Mombasa and Kisumu and through Crown Stockists.