Stronghold Parquet Adhesive

An adhesive with high bonding power designed for sticking wood-block and parquet floorings to smooth floor screeds.

Characteristics: A new formulation incorporating a high bonding polymer.

Advantages: Attractive appearance, quick drying, high bonding power, easily cleaned with water as the solvent.

Appearance: White viscous gel or suspension.

Application: Use a comb trowel.

Thinning & Mixing: Supplied ready for use. Thinning not necessary.

Equipment Cleaner: Water.

Pack Sizes: ½ Kg, 1Kg, 4Kg & 25Kg

Drying Time: 4 Hours

Coverage Capacity: 2 - 2½ m² per Kilogram

Specification for use: Ensure that the surface is clean, dry and free from dust and grease before application commences. Apply a liberal coat of the adhesive on the surfaces to be bonded using a comb trowel. Do not cover too large an area at any one time. Allow drying for approximately 1 minute. Place the blocks (surfaces to be joined) in position with firm but not excessive pressure.

Other Directions: Store in a cool dry place.

For health & safety information, please refer to our Material Safety Data Sheet (MSDS)